I have a Nikon D 800E and my Nikon 500 VR f4.0 lens attached. I have been shooting with this combo for quite a while. Combo works perfect. Any ideas on how to remove the lens? I did see one other post via google, but no answers other then sending it off to Nikon repair.Seems like this has happened to D4 users also and other Nikon 800 users. Also, I really don't like the idea of sending the camera attached to the body to nikon. Suggestions are welcome. Thanks in advance
#2. "RE: Lens stuck on Nikon D800E" | In response to Reply # 0agitater Nikonian since 18th Jan 2007Tue 14-May-13 10:33 AM
>I have a Nikon D 800E and my Nikon 500 VR f4.0 lens attached.
>I have been shooting with this combo for quite a while. Combo
>works perfect. Any ideas on how to remove the lens?
It's an unusual problem.
The only time I've ever encountered it was on a D700 - twice. A friend came to me with the camera, apparently unable to dismount the lens. It turned out that he was not depressing the lock button on the front of the camera. Problem solved.
The second time occurred with a stranger who was using a D700 with a 300mm F4 at a conservation hiking trail area near my home. The mount was admittedly tight, but the guy just wasn't using enough torque to rotate the lens on the mount after depressing the lock button. I helped him out, but the amount of torque needed didn't seem excessive at all to me. I think his expectation might have been that the dismount should occur absolutely smoothly and effortlessly, but some lens mounts are slightly tigher or looser on some bodies.
Anyway, in neither case was there an actual problem with the cameras or the lenses involved.
A jammed mount or over-rotated lens is really, really rare.
#3. "RE: Lens stuck on Nikon D800E" | In response to Reply # 0FredB D3 Nikonian since 26th Jun 2008Tue 14-May-13 12:40 PM
I agree, sending the camera/attached lens anywhere is not an appealing alternative. Is there a friendly Nikon Dealer nearby, preferably one from which you bought either the camera or lens, that you could take it too?
Has the camera/lens ever sustained a hard knock that might be causing a jam? Many (most?) lenses will wiggle (rotational/clock-wise and counter clock-wise) a tiny bit when on the camera. Although this causes a bit of concern among some, it is perfectly normal, and unless extreme, does not effect picture quality. Does your lens have any rotational wiggle that might indicate that it is not jammed? You might try turning the camera/lens back and forth a bit with the bayonet mount unlocked. With the 500mm, I am never sure if one puts the lens on the camera, or the camera on the lens.
#4. "RE: Lens stuck on Nikon D800E" | In response to Reply # 0phfcpa Nikonian since 04th Nov 2007Tue 14-May-13 12:44 PM
Was able to get the lens off, there is a small service area that need to be poked with a small device. Lens came off, but a pin broke, and I will be sending the camera to Nikon for service to repair the broken pin.
#5. "RE: Lens stuck on Nikon D800E" | In response to Reply # 4richardd300 Nikonian since 19th Apr 2009Tue 14-May-13 01:25 PM
Maybe the pin you refer to is the camera aperture lever. I understand that this is one of Nikon's most common camera repairs.
Visit my Nikonians galleryVisit my website www.pixels4u.co.uk
The important thing is not to stop questioning. Curiosity has its own reason for existing. Einstein
#6. "RE: Lens stuck on Nikon D800E" | In response to Reply # 4FredB D3 Nikonian since 26th Jun 2008Tue 14-May-13 05:35 PM
>Was able to get the lens off, there is a small service area
>that need to be poked with a small device. Lens came off, but
>a pin broke, and I will be sending the camera to Nikon for
>service to repair the broken pin.
That is good news-bad news, and still does not explain the initial problem, or necessarily solve it. You might consider sending both camera and lens to Nikon, explaining what happened, and asking Nikon to check the camera-lens fit, in order to make certain that it won't happen again.
I have never heard of the "service area;" has anyone else, and what is it? I'm wondering now if the lens was defective, and that defect caused the problem. If so, and it might be a long-shot, but the lens repair could be covered by your lens warranty if there is one.
Will the lens now attach to the camera, lock, and come off as it should? Or maybe you don't want to try that.