New to Nikon cameras for video and feel like a newbie. Testing out a d800 with a set of Zeiss zf.2 lenses for video work.
When I put the camera in "M" manual mode all four zf.2 lenses we have still auto expose. For example, I can stop down and point the camera at a dark floor and the aperture ring will start to automatically rotate to a decent exposure without touching a thing. If I lock the exposure ring on the lens and try to use the forward camera dial for exposure nothing.
In the manual it says for CPU lenses in manual mode use the back dial for shutter, which works (24fps movie setting/50 shutter speed) and use the forward dial for exposure, not working.
Obviously not understanding something. I know it's got to be a menu or dial setting I just have not discovered yet. zf.2's do have a CPU for everything but AF so not sure what is going on. Any ideas?
I will add I am having the same problem using the camera for stills since it was designed and built for both mediums.
Also, did try a Nikon DX 18-55mm and in manual mode everything works like it should. Have used these Zeiss lenses on a RED ONE, Panasonic AF100, 5D MKii and others, but of course they don't read the CPU data like the Nikon is supposed to without a smart adapter. Perhaps a Nikon firmware issue? Anyone else have a zf.2 they can try on their d800?
I have used a ZF.2 lens on a D800E. With the camera in "M" mode and the lens locked at minimum aperture the two camera command dials select shutter speed and aperture. It works like any other modern lens except for lack of autofocus. There may be less control in video mode than in still mode.
Thanks guys. That is the way it is supposed to work, but with any of my four zf.2 lenses locked (ring locked) at minimum aperture turning the forward dial has no affect at all all. I had these lenses cine-modded; de-clicked, focus gears, etc. and beginning to wonder if that is the problem. Thanks again.
Couple things both in the same menu area: - You could try ==> Custom Settings Menu ==> f) Controls ==> f9) Customize Command Dials ==> Aperture setting ==> Aperture ring This would allow Aperture ring to control Aperture setting.
Independent of the above you could also try ==> Custom Settings Menu ==> f) Controls ==> f9) Customize Command Dials ==> Change main/sub ==> ON. Then see if the back command dial will now change Aperture. Perhaps the problem is worked around by switching to the back dial for Aperture?
If you don't mind, I and perhaps others would be very interested in your impression of the D800 video files.
BTW - My Nikon G lens (no aperture ring), works fine, I can control shutter and aperture with front and back command dials.
I liked the video Craig, and like they say in the link you provided, great blacks in your night shots! Good to see the Nikon's moving into Hollywood. Thom thinks Nikon is going to continue to move into the video world in a big way.
I've got a major video edit to process this weekend. Been using iMovie to date but my most recent shoot I operated two cameras simultaneously. D4 in 2.7 (actual pixels) crop mode and 300mm for tight headshots of actors on stage and D800E at 70-100 mmm wide shot covering the whole stage. I intend to use sound to sync the two streams and then multi-cam to intercut between wide and tight views. Very intimidating for me, I'll need to purchase FCP X and I think Plural Eyes too. I already had Dual Eyes which is great for single-camera work. Big learning curve ahead!
Steve! You are the man! LOL Reversing the function controls did the trick. I now have shutter control on the forward dial and exposure on the rear. The way I work, having big thumbs and all, seems to work better for me.