>The rubber eye cup is set into the socket in the clip. >The clear diopter is only needed for its threads. It affixes >the rubber cup to the clip. >The clip with assembly is then pushed onto the camera >viewfinder. > >I threw a little dust on this so you can clearly see the glass >diopter. It has a mechanical function only. Not for optics, so >get a 0 version. Take note of the diopter threads. > >This store in Hollywood sells the clip & eyecup. These >guys are big guns with the movie industry. They have two >magnifications in dioptors. But not the + 0. With the wrong >dioptor, maybe the adjustable dioptor on the camera itself >might compensate for it. > >http://www.samys.com/c/Eyecups--Eyepieces/3/184.html?orfilterby=vendorname;&orbegin=exact;&orend=Nikon; > >
I've been using a modified DK-22 with a DK-17m epoxied into it, with a DK-19 eye cup for the last few months. I like it, but I can't really see the entire frame -- the corners get cut. It is a bit too much magnification. I just ordered the parts for this set up so I can compare them. I'll post back once I get a chance to try this non-magnified setup.