nikonians

Even though we ARE Nikon lovers,we are NOT affiliated with Nikon Corp. in any way.

Select your language:

How-to's

Understanding DOF and Aperture & Shutter Speed Relationships

Darrell Young (DigitalDarrell) on June 24, 2010


Keywords: fundamentals, dof, depth_of_field, camera, basics, guides, tips, tricks

previous page Page 1/2 show all pages

Understanding Depth-of-Field

Depth-of-field (DOF) is one of those things that can confuse a lot of new camera users. Yet, it is very important!

Choosing the right combination of apertures and shutter speeds is initially hard to comprehend. This article is written to help you understand those relationships to help you control your image's look, while maintaining correct exposure.

I'm going to attempt to explain these concepts with pictures.

Lets say you are taking a picture of a friend, who is standing 2 meters (~6.6 feet) away from you. About 2 meters behind your friend is another person. There is also a third person standing about 2 meters behind the second person. Three people total — each about 2 meters apart — with your friend in front.

You are shooting with a 50mm lens. You focus on your red-shirted friend's face, and take a picture. It looks like this:

 

DOF sample 1
50mm lens, Aperture: f/1.8, Shutter Speed: 1/6000th of a second

 

Notice in the picture above that your friend (in red) is in good focus. The girl standing behind her, to the right, is not in focus, nor is the young lad even farther away to the left. This is the result of shooting with a big "aperture." The f/1.8 is a big opening in the front of your lens. It also causes the depth-of-field, or "zone of sharp focus" to be shallow.

Only the girl in front is in focus at f/1.8. Not much else is in focus, so there is very little depth-of-field. The depth-of-field in this picture is well less than one meter. Probably more like 1/2 meter. (~1.5 feet) The zone of sharp focus is therefore only about 1/2 meter deep.

 

 

The f/1.8 is an "aperture" number. An aperture is simply an opening in the front of your lens controlled by blades. If you divide the focal lenght of the lens into its aperture f-number you get the diameter size of the effective aperure in the lens. In most cameras you should see the f/number somewhere in your viewfinder display but you won't actually see the effects of your aperture setting. This is because your auto single lens reflex (SLR) camera with an auto lens allows you to focus with the aperture blades wide open and out of the way. The aperture closes down to its selected setting when you press the shutter release to take your picture.

Apertures on a typical zoom lens start at about f/3.5 (big aperture), and go to f/22 (small aperture). The bigger the actual size of the aperture can get (the larger the opening) the "faster" the lens is considered. When you hear about a "fast" lens, someone is talking about a lens with a big maximum aperture opening. The 50mm f/1.8 lens I used for our example photos is definitely considered fast!

So what would happen if we closed the aperture down (also referred to as stopped down") to a medium-small aperture like f/8? The picture below shows what that will do to the depth-of-field:

DOF sample 2
50mm lens, Aperture: f/8, Shutter Speed: 1/500th of a second

Notice how the girl in front still looks sharp, and the girl to the right is now in focus too. You still focused your camera on the girl in front but now the girl to the right is sharp too (even though you did not change your focus point).

The depth-of-field, or zone of sharp focus, now extends past the girl in front and covers the girl in back. But, also notice that the boy to the left is still not in focus. The background is not in focus either. This image is the result of a medium aperture opening (f/8), not fast (f/1.8), or slow (f/22). Now let's consider what happens if we "stop down" or close the aperture to f/22:

DOF sample 3
50mm lens, Aperture: f/22, Shutter Speed: 1/40th of a second

Aha! Now everything in the picture is sharp. The smaller f/22 aperture makes it easier to get sharp focus. Remember, you focused on the front girl's face in all these pictures. At first only she was in focus (f/1.8), and as the aperture got smaller more and more of her surroundings came into sharp focus (f/8 and f/22).

So, Depth-of-Field is simply the zone of sharp focus. It extends in front of and behind your focused subject, and gets deeper in both directions as you “stop down” your lens. If you set your camera to A mode, or Aperture Priority, you can adjust this powerful functionality to control what is in focus in your pictures.

(0 Votes)
previous page Page 1/2 show all pages
Darrell Young Darrell Young (DigitalDarrell)

Knoxville, USA
Team, 5953 posts

1 comment

Kim Norton (krn) on October 25, 2013

So glad I figured out I can change the background to white. With my aging eyes it is hard to see a black screen with white text.

Back to top