Menu and Control Buttons
Menu
options are excellent. To have several possible selections
to control the most specific functions is a Nikon characteristic.
I would emphasize the new retouch section and the “my
menu” function, where you can set up commonly used functions
so you won't lose your time going through the menus and submenus
tabs.
Now the two front buttons can be set up to special functions.
In the lower button, like in my D200, I programmed it to spot
meter; in the upper one -where in my D200 was the DOF preview-
now I set it up to the function of changing the information
of non-CPU lenses. On the back of the camera the AE-L/ AF-L
button can also have extra functions, but I like to leave
it just to lock the exposure (AE-L) because I normally use
the Aperture Priority Mode.
It
is possible to program a shot and a sequence of shots, with
regular timing; an interesting option for monitoring a scene.
The
auto gain multiple exposure tool is still wonderful. Used
when the light conditions are too variable and dificult to
meter correctly, it practically becomes a High Dynamic Range
(HDR) right from the camera.
These and others improvements, make the camera performance
magnificent and the act of photographing especially joyful.-
Image Quality at High ISO
A
common complaint from Nikon D200 users was the image quality
and noise using ISOs higher than 800. That created big expectations
at high ISO in the new camera release. I've never had many
image problems with my D200. It wasn't perfect, of course,
but it wasn't as bad as some people say.
The D300 has a new sensor, a 12.3 megapixel CMOS and a new
EXPEED processor capable of generating files at 14 bits in
both RAW and TIFF file formats. This new sensor works from
200 to 3200 ISOs, 100 and 6400 ISOs made possible through
camera processing.
The D300 shows significant improvement in the general image
quality, especially in the high ISOs, showing much less noise
and more sharpness. Comparing the noise reduction options
at high ISOs, 800 or higher, you will notice that the noise
reduction system has improved a lot. Little sharpness is lost,
even using the maximum noise reduction setting; however, I
prefer to just leave it off on the camera and use the noise
reduction tool on the Nikon NX 1.3 software that comes with
the camera.
|
At
right you can see the complete photo from the noise
and sharpness test I did at different ISOs and 1 EV
variation. Below you will find 100% crops of this image.
All images from the ISO test were taken in RAW right
from the camera and converted to JPG using the Nikon
View NX 1.3 program.
Because of the necessary changing of dimensions of the
crops (to fit the format of the article), I kept the
quality and increased the dpi proportionally. You may
click on any of the images below for a bigger enlarged
view. |
|
NIKON
D300; 50mm f/1.8D AF NIKKOR
@ f/2.8 aperture; 1/45 sec. shutter speed
|
| |
|
|
Noise
reduction off |
Noise
reduction low |
Noise
reduction high |
 |
 |
 |
Noise
reduction off |
Noise
reduction low |
Noise
reduction high |
The
D300 contrast and colors are very smooth, more pleasant and
natural. I like to use image options at zero, except saturation,
that I use at its maximum, and Adobe RGB.
Using 14bits RAW the colors are even smoother and the color
gradation very pleasant; however, the image size is considerably
bigger and the shutter speed decreases from 6 to 2.5 photos
per second. I also noticed that the mirror makes a different
sound when using the 14 bits mode. On 14 bits configuration,
the feeling is that the camera is using a slower exposure
time.