I picked up a D7000 last week. Charged the battery, took a dozen shots and put it in the bag. I am a sports shooter, so the video is of no concern to me. How do you test for hot pixels in still pics? Take shots with the lens cap on? Then what am I looking for and at what magnification? Are they just dots, and will they be white or colored? Thanks in advance.
#2. "RE: Hot Pixel Issue." In response to Reply # 0
I agree with Pete re appearance of the typical pixel defect. I have several digi cameras but the D7000 is the first to have absolutely no defects. No idea if this is luck or the quality control is now really that good.
Yes, you can look for them by taking shots with the lens cap on. They are more likely to appear at long exposure (let's say a couple of seconds). Make sure noise reduction is off when you try this.
There is a program called "Pixel Fixer" that can mask/repair these. I seem to recall NIkon Capture NX can map and fix bad pixels as well. There are others. "Pixel Fixer" used to be free and may still be. I have a copy and it worked well. I say "worked" because I discovered a few pixel defects are very unlikely to appear in a prepared image. This is mostly a pixel-peeper's obsession. Unless there are very many and/or they are close together and you view at 100% or greater they will almost invariably disappear during the re-sampling and other image processing activities that take place either in-camera or during your work-flow. If, on rare occasion, one should still be visible it's easy enough to kill it with clone brush.
If defects really are a problem the manufacturer will do something on warranty. I have heard of nit-pickers sending a DSLR back to have the sensor replaced for a couple of hot pixels only to have it come back with even more (!). Practically all cameras will have some of these defects straight out of the box. 99% of the time they do not result in a defect visible in the final imaging product.