"VR on and off question?" Tue 06-Oct-09 04:27 PM by empipoy
hi i am new to this forum and also new to dslr. i just bought my new d3000 yesterday. i have noticed the differences of the shutter when the VR is on or off. when the VR is off, when i click for a shoot, right after i hear the shutter, the image in the view finder is steady... but when i turn ON the VR, after i hear the shutter, the image in the view finder move a little then have the capture image. is it normal that the image move a little?? coz if not, i will return for exchange of my lens.. sorry i am very new to this. thanks for any replies.
gkaiseril Chicago, US Nikonian since 28th Oct 2005
Tue 06-Oct-09 04:36 PM
#1. "RE: VR on and off question?" In response to Reply # 0 Tue 06-Oct-09 04:45 PM by gkaiseril
What you are seeing the VR stabilization activating and engaging. Your technique should be let the VR remain on (except for those situations where it is not needed), half press the shutter release to engage the AE, AF and VR electronics, and after the VR has engaged then fully depress the shutter release.
This technique is covered in the instructions for the VR lenses along with other usage information:
"¦Notes on using vibration reduction mode Wait until the image in the viewfinder stops vibrating before fully depressing the shutter release button after you have lightly pressed the shutter release button. Due to the characteristics of the vibration reduction mechanism, the image in the viewfinder may become slightly blurred after releasing the shutter. This is not a malfunction. Do not turn the camera power OFF or remove the lens from the camera while the vibration reduction mode is in operation. (Otherwise, the lens may emit a chattering noise if the camera is shaken. This is not a malfunction. Turn the camera power ON again to correct this.)"
#2. "RE: VR on and off question?" In response to Reply # 0
Welcome to Nikonians! RELAX!!!! Don't worry the VR mechinism is working normally. As George noted above, when you have VR On press the shutter release button half way and allow eneough time for the VR to settle before releasing the shutter. Good Luck and Enjoy your Nikons!
#3. "RE: VR on and off question?" In response to Reply # 2
thanks for your replies. im just bothered because the whole image in the viewfinder move right after the shutter everytime the VR is turned ON. but when its turned off, it is steady. so my lens is good and no reason to return it for exchange. i really appreciate your immediate replies. this made me decide to stay in this forum. worth it!
#4. "RE: VR on and off question?" In response to Reply # 3 Wed 07-Oct-09 05:20 PM by empipoy
i really hear a click sound like inside the lens is loose when the VR is ON when doing the half press of the shutter then releasing it. but when its VR OFF its not doing the same thing. is it doing the same as yours guys?
and also i tried my camera on tripod without moving. i compare the shot when the VR is ON and OFF. i focus it correctly. and the i noticed that there is a difference on the centering or alignment of the picture. when VR is on it makes the picture too high. is it normal? coz i got bothered with that "movement" which i can also feel the vibration like its loose.