Hello everybody. This is my first post on nikonians, so I look forward to interacting with everyone.
I have an SB-28 with the hot shoe (for my D7000 and the speedlight) along with the PC cable.
I just invested in an SB-910, so i'm trying to figure out if i can use both with some sort of pop up flash command on the camera for the SB-910 along with a wired connection to the SB-28 as a second flash.
#2. "RE: Nikon SB-28 with SB-910" In response to Reply # 1
Yes! It will work. Keep in mind that the SB-28 must be in Non-TTL Auto flash mode or Manual flash mode. For the most consistant results, I would recommend setting the camera in Manual exposure mode and have the ISO set in Manual as well.
If you get a Nikon SU-4 slave to mount the SB-28 in you will be able to use both the SB-28 in the SU-4 and the SB-910 in SU-4 mode as remotes triggered by the built in Speedlight (assuming your camera body has one) set in Manual flash mode. Good Luck and Enjoy your Nikons!
Flash zebra may have an optical trigger that works with the CLS pre-flash. If that is possible, use CLS to trigger the sd 910. The sb -28 still needs to be set on manual, and its power is set on the flash.