M_Jackson Jackson, US Nikonian since 28th Oct 2005
Mon 19-Nov-12 10:41 PM
"The sensor chips on the gels for SB900 and SB910 strobes"
The SB900s and the old style colored gels and the SB900 units have two of the new hard plastic gels. Both kinds have the little smart chips on them that let the strobe know what kind of gel is mounted and apparently that information is passed back through to the camera. At least in Auto White Balance, I understand the camera will be making compensations for the filters.
Is that a good thing? Normally, I shoot in Manual White balance so I control what is going on. Will Manual bypass the adjustments that might have been made automatically from the chip data?
I watched some Joe McNally tutorial videos about the SB900 on Kelby Training. He explained the chips, but never clearly indicated whether he liked the feature. Seemed like he was holding back some comments.
Do the people here use this feature or tape over the chips?
gkaiseril Chicago, US Nikonian since 28th Oct 2005
Wed 21-Nov-12 07:58 PM
#3. "RE: The sensor chips on the gels for SB900 and SB910 strobes" In response to Reply # 0 Wed 21-Nov-12 08:08 PM by gkaiseril
The control tags on the gels are not electrical chips, just a decal or ink spot that blocks the light to a sensor. These sensors generate a binary coded value that identifies the filter. And this only applies to the on camera flash. There is a pinned post about the CLS Pre-flash sequence and the SB-900/910 did not change this part of the CLS system. There was a post that decoded the markers.
I do not think one would want the remotes to control the white balance as the remotes are more about highlighting can not being the main exposure of the image. Also by not having the remote controlling the camera one has more artistic control over the lighting. You can have splashes of color on the background or as a highlight.