Go to a  "printer friendly" view of this message which allow an easy print Printer-friendly copy Go to the page which allows you to send this topic link and a message to a friend Email this topic to a friend
Forums Lobby GET TO KNOW YOUR CAMERA & MASTER IT Nikon D5300/D5200/D5100/D5000/D3300/D3200/D3100/D3000 (Public) topic #6713
View in linear mode

Subject: "RE: Getting to know my D3200... questions" Previous topic | Next topic
MEMcD Moderator In depth knowledge in various areas Nikonian since 24th Dec 2007Mon 17-Sep-12 09:11 AM
25986 posts Share on Facebook Share on Twitter Share on Linkedin    Click to send email to this author Click to send private message to this authorClick to view this author's profile
#3. "RE: Getting to know my D3200... questions"
In response to In response to 2


US
          

Hi John,


>I always treated Aperture Mode as a means of controling DoF,
>whereas Shutter Mode was for controling camera & subject
>blur (or lack thereof). If that was the starting point would I
>not be better off in S mode and set the shutter speed to say
>1/200 and let the camera adjust the aperture and ISO to suit?

Sure, you could use Shutter (S) priority mode, though depending on how low the ambient light level is, you might run out of ISO before getting a correct exposure without decreasing the shutter speed as well.
You could also use a shorter focal length which will increase the aperture (decrease the f/#) though using wide angles is not flattering to the human form. 30mm - 35mm should be ok, I don't have an 18-55mm handy to check the aperture at 30-35mm.

Personally I would use Manual exposure mode.

>Q3. What is the highest ISO I can use and still get reasonable
>4x6 prints? (These particular shots will never be severely
>cropped or enlarged.)

I don't have a D3200 though it should provide reasonably good IQ at about ISO 3200 and possible up to ISO 6400.
I am extrapolating the numbers using dxoMark.com sensor ratings comparing the D3200's high ISO performance to the bodies I have.
I would recommend taking a few test shots at various high ISO settings and see for yourself since each person has their own sense of how much noise is acceptable. If the noise is objectionable, you can use Noise Ninja, DxO, or other Noise Reduction Software in PP.

>(I am thinking I could make the necessary settings in P mode
>and have them there when needed.)

Give it a try.
Experiment and learn what works best for your particular requirements and style. Program mode will not keep settings in a memory per say.
In P, S, and A exposure modes: if the ambient conditions are beyond of the range of settings available, the camera will indicate HI or LO in the display.
Good Luck and Enjoy your Nikons!

Best Regards,
Marty

  

Alert Printer-friendly copy | Reply | Reply with quote

A general, generic topicGetting to know my D3200... questions [View all] , JohnD3200 , Mon 17-Sep-12 04:16 AM
 
Subject Author Message Date ID
Reply message RE: Getting to know my D3200... questions
MEMcD Moderator
17th Sep 2012
1
Reply message RE: Getting to know my D3200... questions
JohnD3200
17th Sep 2012
2
     Reply message RE: Getting to know my D3200... questions
MEMcD Moderator
17th Sep 2012
3
          Reply message RE: Getting to know my D3200... questions
stevenchadg72
22nd Dec 2012
4
Reply message RE: Getting to know my D3200... questions
coolmom42 Silver Member
23rd Dec 2012
5

Forums Lobby GET TO KNOW YOUR CAMERA & MASTER IT Nikon D5300/D5200/D5100/D5000/D3300/D3200/D3100/D3000 (Public) topic #6713 Previous topic | Next topic


Take the Nikonians Tour and learn more about being a Nikonian Wiki /FAQ /Help Listen to our MP3 photography radio channels Find anything on Nikon and imaging technology - fast!

Copyright © Nikonians 2000, 2014
All Rights Reserved

Nikonians®, NikoScope® and NikoniansAcademy™ are trademarks owned by Nikonians.org.
Nikon®, Nikonos® and Nikkor® are registered trademarks of Nikon Corporation.