The Really Right Stuff L bracket for my D800E makes it impossible to open the door to the connections (HDMI, USB, etc.) on the camera without using some type of tool (paperclip or other object). I cannot open it with my fingers. This is not a big problem but I am curious whether this is normal. I emailed RRS with this question but have not received a response. Since I am not really concerned about it I have not followed up with RRS. Do those of you who use the L bracket with your D800/E experience the same difficulty? If so do you have any recommendations of what "tool" to use to open the door? I don't like to poke around on the rubber seal with sharp objects in order to open the door. I will be interested to learn what your experience has been with this setup.
#1. "RE: RRS L Bracket Obstructs Connector Cover." In response to Reply # 0
I have RRS brackets on my D3s and D700 and have the same issue there. I got a Kirk L bracket for my D800E (mainly because I ordered everything from B&H and they sell Kirk and not RRS) and I am able to get my thumbnail in from the back and open the door, so it has a bit more room on the back between the body and the bracket.
#2. "RE: RRS L Bracket Obstructs Connector Cover." In response to Reply # 0
I've had my D800E for 9 months and never had a reason to open that cover; what are you guys doing that you need access? I have the RRS bracket and it looks like you could just leave the door open slightly and be able to open it with your fingernail. Dave Jolley
David Jolley Pickerington, Ohio Please visit my Website
#3. "RE: RRS L Bracket Obstructs Connector Cover." In response to Reply # 0
Farmington Hills, US
I have the same problem with my Kirk L-bracket on my D800e. The same problem also occurs with the Kirk L-brackets on my D4, D300, and D90. I've just learned to live with it.
Gary in SE Michigan, USA. Co-organizer of the Southern Michigan Chapter Nikonians membership - My most important photographic investment, after the camera. D4, D800e, D300, D90, F6, FM3a (black), FM2n (chrome) YashicaMat 124, Graflex Speed Graphic 4x5 My Nikonians Gallery & Our Chapter Gallery
#8. "RE: RRS L Bracket Obstructs Connector Cover." In response to Reply # 3
I can certainly learn to live with it. It is not a big deal. I was mainly interested in learning whether my bracket was perhaps out of spec or defective. I did not think so; however, the other L brackets I have used did not block access to any controls so I thought that there might be a problem with mine. If you and others have to put up with the "problem" I can also do so. Thanks for the post.
#9. "RE: RRS L Bracket Obstructs Connector Cover." In response to Reply # 4
I tried your credit card tool method and, as you say, it does work like a charm. It is certainly a better tool than paper clips or other sharp objects, which might damage the rubber seal. The only problem I see with your method is that it puts a credit card in my hand. I try to avoid that since I might be tempted to buy more camera gear. I recently paid the credit card charge for the D800E and I am still smarting from that blow. Thanks for the credit card tip.
#11. "RE: RRS L Bracket Obstructs Connector Cover." In response to Reply # 10
I have the Markins M20 ballhead but I did not realize that Markins made L brackets. It sounds like the Markins may be the better bracket. I assume that it is finely machined and top quality like the ballheads.
#12. "RE: RRS L Bracket Obstructs Connector Cover." In response to Reply # 0
I'm a little confused by all this . . .
My RRS D800 brackets (w/ & w/o battery pack) have an adjustable mounting screw so that you can back off the bracket from the left end of the camera if you are in the habit of using that door. About 1/4" gives you easy access to the door.
It appears to me that that option allowed RRS to make the bracket a bit narrow on that end to minimize the added dimension to the camera.
I think the cutaway is not to get your finger in there ('cause it doesn't with the bracket tight against the left end of the camera body) but to provide additional clearance for cables.
#13. "RE: RRS L Bracket Obstructs Connector Cover." In response to Reply # 12
I think that it would work to move the bracket out a bit as you suggest. However, I think that there is a place on the mounting rail that is meant to accomodate the mounting screw in order that it is more secure in that position (which places the bracket snug against the camera body). I am unable to check that at the moment so I could be wrong. That, of course, is not to say that the bracket would not be secure if one did move it out a bit as you suggest. In any event it is clear that none of us who have noticed this issue are going to lose any sleep over it. As noted above I was mainly interested in finding out if others were also unable to open the door without using some type of improvised tool or object to do so. I have no difficulty opening the door on my D200 with my fingers with the L bracket mounted. It appears that the D800 bracket could have been designed a little better but that is a nitpick and not a serious complaint.
#15. "RE: RRS L Bracket Obstructs Connector Cover." In response to Reply # 11
I use Markins' plates on ALL my cameras, they are very nicely machined.
In my case, when I mount a camera to support, it is either onto a monopod tilt-swivel or a gimbal. To mount on these I need forward orientation which Markins' unique bi-directional plates provide. The D800 bi-directional plate is the nicest one yet, with a beautiful curved outline exactly matching the curves at the base of the D800 body. These bi-directional plates are not, as far as I am aware, available in an L-design, but I have my monopod tilt-swivel which can be mounted to my gimbal to allow portrait orientation shooting. Because I use a gimbal, I don't use a ballhead (aside from I have one for my ground pod for occasional use).
#19. "RE: RRS L Bracket Obstructs Connector Cover." In response to Reply # 2
New York, US
If you were shooting tethered or doing video with an external mic, then those are all reasons to have the cover open.
I had to use a paperclip to open the cover of the D300 with the RRS L-plate installed. With the D800, I wasn't sure there was even enough clearance for that, so I've been repositioning the L-bracket to give more clearance (admittedly, a royal pain in the you know what).
#20. "RE: RRS L Bracket Obstructs Connector Cover." In response to Reply # 18
Well, credit cards, lever on fingernail clipper...it all goes to show that there are suitable tools to get this job done without using sharp objects. Now I am satisfied that there is nothing wrong with my bracket, that everyone else has the same problem and that there are suitable tools available to solve the problem. Thanks for the tip.
#21. "RE: RRS L Bracket Obstructs Connector Cover." In response to Reply # 20
I don't think any L bracket deals with door access as well as we would like, but differences in bracket design and camera body design, especially the size and shape of the door, yield slightly different results. Some brackets provide slightly better access than others. It's just the nature of the beast!
I personally prefer the models with the thumb cutout, which I think helps a bit although not in all cases and with all size thumbs!
_________________________________ Neil Nikonians Team My Gallery
#23. "RE: RRS L Bracket Obstructs Connector Cover." In response to Reply # 0
I have no problems open it with my finger tip/finger nail, but then I don't have large fingers. If you are trying to insert a USB or HDMI mini or headphones jack anyone one of those works. They usually don't have sharp edges.